Sunday, June 28

TECHNICAL SESSIONS

WorldPM2020 TECHNICAL SESSIONS

Sunday Morning

10:45 a.m.–Noon

SESSION 01

Lubricants I

Session Chair:
Mark Dougan
AMES S.A.

Mix Solution for High Green-Strength and Green Machining
Roland Warzel, III,
North American Höganäs Co.

Influence of Die-Wall Lubrication on Tensile Properties and Geometrical Precision of High-Temperature Sintered Low-Alloy Steel Parts
Alberto Molinari, FAPMI,
University of Trento

High-Performance Lubricant for High-Density Applications and Warm-Die Compaction
Saba Mousavinasab,
Rio Tinto Metal Powders

SESSION 02

Atomization I

Session Chair:
Andrew Bettin
Rio Tinto Metal Powders

Thermo-Fluid Analysis of Satellite Formation During Close-Coupled Gas- Atomization for Production of Precision Metal Powders
Emma White,
Ames Laboratory

Impacts of Hard-Phase Morphology on PM 316/Hard-Phase Properties in Green State and Sintered
Bradley Richards,
Ametek Inc.

CFD Modeling of Two-Phase Flow in High-Pressure Gas Atomization
Andrew Mullis,
University of Leeds

SESSION 03

Powder Consolidation

Session Chair:
John von Arx
Phoenix Sintered Metals LLC

Production of Samarium-Iron-Nickel Magnet Sheet Magnet by Powder Rolling Method
Akihide Hosokawa,
National Institute of Advanced Industrial Science and Technology

Internet of Things Solutions for a Smart, Connected and Highly Efficient Sinter Production
Christian Müller,
DORST Technologies GmbH & Co. KG

Large-Area Ceramic and Powder Metallic Components in High-Throughput Series Production
Benjamin Luthardt,
FCT Systeme GmbH

SESSION 04

Secondary Operations I

Session Chair:
Scott Davis
Hoeganaes Corporation

Evaluation of Consistency in Machining of PM Components Produced with Common Copper Steels
Cody Kalinoski,
Engineered Sintered Components

Joining of Two-Piece Aluminum Metal Matrix Composite (AlMMC) Transmission Carrier via Friction Stir Welding
Logan Smith,
GKN Sinter Metals

Effect of Extrusion Ratio on Microstructure and Mechanical Properties of Copper Prepared By Hot Extrusion
Rajeev Srivastava,
Motilal Nehru National Institute of Technology Allahabad

SESSION 05

Management Issues

Session Chair:
Robert Hayes
Pheonix Sintered Metals LLC

Manufacturing Costs Analysis for a PM Gear-Processing Route: A Case Study of a Ring Gear in an Automotive Application
Babak Kianian,
Lund University

Powder Metallurgy Method for Manufacturing of Planetary Carrier
Yusuke Hori,
Sumitomo Electric Sintered Alloy, Ltd.

Recent Developments on Forged Special Steels, Remelting and PM
Benedikt Blitz,
SMR Premium GmbH

SESSION 06

General Modeling

Session Chair:
Ilaria Cristofolini
University of Trento

Modeling and Numerical Simulation of Solid-State Sintering of Metal Micro- Fluidic Device Obtained by MIM Process
Thierry Barrière,
Femto-ST Institute

Microstructural Evolution Simulation for Property Prediction in Cold Spray Processing
Danielle Cote,
Worcester Polytechnic Institute

Experimental Analysis and Numerical Modeling of Filling Process of Micro-Prisms by Feedstock Using Hot Embossing Process
Mohamed Sahli,
Femto-ST Institute

WorldPM2020 TECHNICAL SESSIONS

Sunday Afternoon

2:15–3:30 p.m.

SESSION 07

Lubricants II

Session Chair:
Jason Gabler
Advantage Metal Powders, Inc.

High-Performance Lubricant to Reduce Green Scrap Rate In Mass Production
Qing Zhang,
Höganäs China Co., Ltd

Comparative Evaluations of PM Characteristics of Commercial PM Lubricants in an Iron-Based Mixture Using Advanced Characterization Methods
Amir Shirani,
H.L. Blachford

Improved Powder Compaction Through Use of Advanced Binders and Lubricants
Kylan McQuaig,
Hoeganaes Corporation

SESSION 08

Atomization II

Session Chair:
Richard Mason
Mason Global Materials

A Lab-Scale Water Atomizer to Produce Metal Powder: Flexible Design for Parametric Study and Visualization
Ali Asgarian,
University of Toronto

Optimization of Water-Atomized Tool Steel Powders for Utilization in Direct Energy Deposition (DED)
Denis Mutel,
Université Laval

An Opportunistic Approach to Study a Large-Scale Metal Powder Plant
Ali Asgarian,
University of Toronto

SESSION 09

Green Properties

Session Chair:
John Blauser
Gasbarre Precision Tooling

Influence of Densification Process on Properties and Dimensional Precision
Richard Scott,
Nichols Portland LLC

Compaction Techniques for High-Density PM Applications and the Characterization of Their Effect on Mechanical Properties
Amber Tims, PMT,
North American Höganäs  Co.

Innovative Helical Gear System
Francesco Naclerio,
Officine Meccaniche Pontillo & C. Srl

SESSION 10

Advanced Nano Materials: Magnetic Materials

Session Chair:
Salvator Nigarura
Global Tungsten & Powders Corp.

Effect of Novel Nano-Boronated Alloy on the Densification, Surface Morphology, Hardness and Magnetic Properties of Sintered AISI 630
Arun Chattopadhyay,
Uniformity Labs

Characterization of SmCo Nanopowder Prepared by Induction Thermal Plasma
Kwangjae Park,
Nagoya University

Iron-Based Soft Magnetic Composite Coated by Nano-Zno and Potassium Silicate
Antonio Ramos Filho,
Federal University of Santa Catarina

WorldPM2020 TECHNICAL SESSIONS

Sunday Afternoon

3:45–5:00 p.m.

SESSION 11

Dispersion Strength Alloys

Session Chair:
Matt Dunstan
U.S. Army Research Laboratory

ODS Steels as Structural Materials for High-Temperature Applications Produced Without Mechanical Alloying: STARS Route
Iñigo Iturriza,
Ceit

Towards a HIP-Processed, Tool Steel-Based Composite With Balanced Thermomechanical Properties
Maxime Gauthier,
National Research Council Canada

Structural Evolution and Thermal Stability of In-Situ Synthesized Tungsten Dispersion-Strengthened Copper Alloy
Tianxing Lu,
University of Science and Technology Beijing

SESSION 12

Material Characterization

Session Chair:
Arun Chattopadhyay
Uniformity Labs, Inc.

Effects of Mixing Different Size Fractions and Powder Types on Tap Density and Flow
Thomas Williamson,
Atomising Systems Limited

Influence of NbC Reinforcement Phases on the Atomization Process
Gert Bartzsch,
TU Bergakademie Freiberg, IEST

Wetting and Dispersion of SiC Nanoparticles and Aluminium Powder via Planetary Ball Milling
Karl Tassenberg,
University of Leicester